Be Alerted of Smoke From Fire, or Poisonous Carbon Monoxide!
Smoke detectors are an absolute necessity in the home. They protect you and your family from the dangers of fire.
Another invaluable device to have installed in your home is the carbon monoxide detector. Carbon monoxide is extremely toxic and usually goes undetected.
Most fire deaths happen at night, while people are asleep. This makes early fire detection and warning especially important. Contrary to popular belief, the smell of smoke may not wake a sleeping person. The poisonous gases and smoke produced by a fire can numb the senses and put you into a deeper sleep.
Inexpensive household smoke detectors sound an alarm, alerting you to a fire. By giving you time to escape, smoke detectors cut your risk of dying in a home fire nearly in half. Smoke detectors save so many lives that most states have laws requiring them in private homes.
How Many Smoke Detectors do I Need or are Required
According to the National Fire Protection Association (NFPA), minimum protection requires a smoke detector outside each sleeping area and on every level of the home, including the basement. On floors without bedrooms, detectors should be installed in or near living areas such as dens, living rooms, or family room.
Be sure everyone sleeping in your home can hear your smoke detectors’ alarms even with bedroom doors closed. If not, or if any residents are hearing-impaired, install additional detectors inside bedrooms. For the hearing-impaired, there are smoke detectors that flash a strobe light in addition to sounding an audible alarm.
For extra protection, NFPA suggests installing additional detectors in dining rooms, furnace rooms, utility rooms, and hallways. Smoke detectors are not recommended for kitchens or bathrooms where cooking fumes or steam can be an issue. They are also not recommended in garages, attics and other unheated spaces where humidity and temperature changes might affect the detector’s operation.
Choosing a Detector
Dozens of brands of smoke detectors are for sale in hardware, department, and discount stores. Be sure that the smoke detector you buy bears the label of an independent testing laboratory, such as UL or FM. Several types of detectors are available. Some run on batteries, others on household current (now smoke detectors have both, usually for new construction or major remodeling). Some detect smoke using an ionization sensor; others use a photoelectric detection system.
All approved smoke detectors, regardless of type, will offer adequate protection provided they are installed and maintained properly.
-Ionization Smoke Detectors- These units detect the fire’s visible and invisible smoke particles. Smoke reduces the electric current within the unit, which in turn starts the alarm.
-Photoelectric Smoke Detector- These units also detect smoke particles, but only those large enough to be by the unit. The smoke blocks the path of a light beam within the detectors.
Either type of smoke detector can provide your family with an early warning of fire.
There are units available that have both ionization and photoelectric detection within the smoke detector unit. These should improve detector reliability by reducing false alarms.
The best type of system to have is the combination of 110 volt hardwired interconnected with a battery backup.
Why Do I Get False Alarms
A smoke detector false alarm can be initiated by small dirt particles, smoke from cooking, placement to close to fluorescent lighting fixtures, and dust or temperature extremes. These may be present in garages, kitchens and attics. Fresh paint fumes can get heavy enough to cause a false alarm, so air out freshly painted rooms. Steam from bathrooms can also cause a false alarm.
Where Do I Install Smoke Detectors
Because smoke rises, mount detectors high on a wall or on the ceiling. Wall-mounted units should be hung 6 to 12 inches from the ceiling. A ceiling-mounted detector should be attached at least 6 inches from the nearest wall. In rooms with pitched ceilings, mount the detector at or near the ceilings highest point. Do not place detectors within 6 inches of where the wall and ceiling meet, on either surface. This is a dead airspace that gets little air circulation. Instructions for installation and placement should accompany the unit. Follow these instructions precisely.
How Do I Test the Smoke Detector
All smoke detectors are required to have a test button installed on them; this test button checks all functions of the smoke detector. If your smoke detector does not have a test button, you should replace the unit for one that has one. This test should be done at least once every 30 days.
When Do I Replace the Smoke Detector Battery
Batteries weaken with age, and must be checked and replace at regular intervals (usually every 9 months). Battery power units that are listed by UL or FM will generate a beeping sound (usually at night when you trying to sleep) to indicate when the batteries need to be replaced. Remember having a detector with dead batteries is the same as having no detector at all.
When Do I Replace the Smoke Detector
Studies show that untested smoke detectors lose about half of their dependability after a 5 to 7 year period. Smoke detectors should be replaced about 8 to 10 years. Read the manufacturer’s instructions as they usually have recommendations
Do I Clean My Smoke Detector
Yes! Dust can damage your detector’s sensitivity. Most units need to be cleaned at least once a year, just use your vacuum cleaner to clean dust out of unit. Read the manufacturer’s instructions manual
Carbon Monoxide Detectors
Carbon Monoxide is an odorless colorless gas that can go undetected without the use of carbon monoxide detector. Carbon monoxide detectors are to be installed outside of every sleeping type quarters in the entire house. A carbon monoxide detector should be installed outside of the utility room. A carbon detector should also be installed in the room next to the garage.
Don’t go to sleep another night without the use of smoke and carbon monoxide detectors. Call Rick at Richard Marton Electrical Contractor LLC, and he will personally come to your home to design the right system to keep you and your family safe from a fire or carbon monoxide poisoning.
Call Now! 201-262-7710
Richard Marton Electrical Contractor LLC is a full service electrical contractor serving homeowners and businesses in Bergen, Passaic, Essex and Morris County New Jersey with electrical installations and repairs. We are also a certified Generac Generator dealer and installer.
Richard Marton Electrical Contractor LLC works with general contractors, residential architects, interior decorators, interior designers, painters, property management and property maintenance professionals, and professional organizers. We work with these professionals to give clients top of the line electrical installations within such projects as residential remodeling, residential renovations, plus build outs of new kitchens, bathrooms, home offices, add-a-level residential project and more.
Back to Electrical Installations